|
Filtercartridge
"acuraScreen" |
|
acuraScreen |
|
|
acuraScreen |
|
All Stainless Steel Cleanable Filter
Cartridges |
|
Features |
 |
|
DESIGNED FOR HIGH
TEMPERATURES
up to 400°C depending on different gasket materials |
|
|
|
CLEANABLE
by using backflushing, ultrasonic cleaning
or chemical cleaning |
|
|
|
VERY HIGH SCREEN STRENGTH
by carefully controlled woven screen material |
|
Benefits of acuraScreen |
|
|
HIGH SERVICE TEMPERATURES
- filtercartridges all made from stainless steel with threaded
connector ends - or high temperature gaskets. |
|
|
HIGH FLOWRATES -
combined with a low differential pressure. |
|
|
LONG SERVICE LIFE -
high withstands of pressure drops assure constant filtration results - and
reduce working costs. |
|
|
BROAD CHEMICAL
COMPATIBILITY - acuraScreen all stainless steel for compatibility with a
wide range of process fluids. |
|
|
EXCELLENT MATERIAL
CHARCTERISTICS -
high corrosive properties, high viscosity, high purity, perfectly
controlled particle removal efficiency. |
|
|
EXTENSIVE PROGRAM -
interchangeable filter elements with a wide range of micron ratings for
all standard filter housings. |
|
acuraScreen
Construction |
|
Betamesh® |
|
acuraScreen
filtercartridges comprise a woven metal filter media, made up of
stainless steel wires, fixed on a stainless steel core. Depending on the
micron rating we use "Plain Square Weave" (>90µm) or "Twilled Dutch
Weave".
The filtercartridges can be easily cleaned by using various methods like
backflushing, ultrasonic cleaning or chemical cleaning. acuraScreen
filtercartridges have been developed for filtration of fluids with high
temperature, high viscosity, high purity and corrosive properties. acuraScreen
stainless steel cartridges are available with flat gaskets at both ends
or all standard adaptor configurations. |
|
Twilled Dutch Weave |
Betamesh®-With
this type of weave, the warp wires are always thicker than the weft
wires. The proximity of the weft wires to each other results in a
so-called 'closed mesh'. Its particular advantages lie in its efficient
through-flow capacity and uniform apertures.
Micron rating 20-90 µm |
During braiding, the weft wires are forced
together. In each case, one warp wire is woven over multiple weft wires.
By comparison with a plain braid, this weave has double the number of
weft wires. The advantages lie in its smooth surface and ultra-fine
filtration.
Micron rating 1-20 µm |
|
acuraScreen
Specifications |
|
Material |
: |
Stainless Steel (1.4301 / 1.4401) |
|
Gasket materials for Double Open End cartridges |
: |
Nitrile
or PTFE |
| O-Ring-Gaskets
for Adaptor cartridges |
: |
Silicone, Fluorcarbon, EPR,
Nitrile and FEP |
|
Maximum operating temperature |
: |
400°C (Depending on the Type of gasket or connection) |
| Maximum
differential pressure drop |
: |
6
bar |
|
Outer diameter |
: |
63 mm |
| Inner
diameter |
: |
28 mm |
|
Nominal micron ratings |
: |
1
up to 3000 µm |
| Available
cartridge length |
: |
5" up to 40" |
|
:Ask for more informations
please. |
|
|
acuraScreen
ORDERING INFORMATIONS |
|
Type |
Length
(nominal) |
Surface |
Screen |
Adaptorconfigurations |
Material
Gaskets |
Retention
(Micrometer) |
|
AS
=
acuraScreen |
*09
= 9 3/4"
10 = 10"
*19 = 19 1/2"
20 = 20"
*29 = 29 1/4"
30 = 30"
*39 = 39"
40 = 40" |
G
= smooth screen
P = pleated screen |
B
=
Betamesh
K
= Twilled Dutch
Weave
Q
= Square Wire
Mesh |
F1
: double open end
F2 : single open end Code 3 (222)
F3 : single open end with Fin (222)
Code 8
F4
: single open end (226)
F5 : single open end with Fin (226)
Code 7
F6
: 1 1/4"Male with hexagon cap nut |
A
: ohne
N : NBR
E : EPDM
F : FPM
P
: PTFE
S : FEP/FPM
Q : MVQ |
0001
= 1 µm
0005 = 5 µm
0010 = 10 µm
0025 = 25 µm
0050 = 50 µm
0100 = 100 µm
0500 = 500 µm
1000 = 1000 µm
Other Micron Rates on request! |
| |
* Only available for adaptorconfiguration F1
! |
|
Ordering example
: AS-09GB-F1P-0025 |
|
Adaptorconfigurations
|
|
 |
|
